Categories

Manufacturers

   

Advanced Search

49 results found for "wildcat xx"

Axle Alignment Bar // 2018 Wildcat XX
SKU: TWCXX-AAB
$69.95
Axle alignment is a critical to prevent potential axle failures on the Wildcat XX. This bar acts as a simple go/no go gauge so you can easily check for the proper swing arm length and make adjustments if necessary.
Speedwerx Hypershift 6-Series Machined Weights // Light Tip Non-Adjustable - Wildcat XX  // Set of 3 with Bushings
SKU: X6-XX-2
$248.70
These weights are designed specifically for Wildcat XX models with the TEAM primary clutch.
Available Weights:
Speedwerx Hypershift 6-Series Machined Weights // Heavy Tip Adjustable - Wildcat XX  // Set of 3 with Bushings
SKU: X6-XX
$248.70
These weights are designed specifically for Wildcat XX models with the TEAM primary clutch.
Available Weights:
Optional Adjustment Kit: Adjustable Weight Kit (Add $15.95)
Speedwerx H5 Alloy Primary Springs // TEAM Rapid Response Primary - Wildcat XX
SKU: CCH5-H
$49.95
We have the rates you need...
Rate (Stripe Color):
Speedwerx TEAM BOSS Secondary Helixes // Wildcat XX
SKU: TBH-XX
$199.95
We have a variety of specially cut helixes to suit virtually any application.
Available Angles:
FOX Shox Short Course Racing Valve and Spring Kit // 2018 Wildcat XX
SKU: TWCXX-FSK
$1695.00
Please call 651-982-6020 or email tech@speedwerx.com if you are interested in getting your suspension setup for short course racing!
Oil Cooler Kit // 2018 Wildcat XX
SKU: TWCXX-OCK
$699.95
Availability TBA
0823-529 OEM Textron Off Road Drive Belt - Wildcat XX
SKU: 0823-529
$133.95
We carry a full line of Textron Off Road OEM drive belts. We have them on hand and ready to ship to you!
TEAM BOSS Driven Clutch Torlon Rollers // 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: 460329
$19.95
Venom Products High Performance Torlon® Rollers for the Arctic Cat B.O.S.S. clutch. This is an upgrade from the factory rollers. Sold individually- quanitity of two required per machine!
TEAM BOSS Driven Clutch Delrin Washers // 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: 930651
$10.00
The secondary spring has to rotate in the spider as the clutch shifts. You can greatly reduce the scrubbing friction of the spring with the Delrin washer kit. Sold in a pack of 3.
Lightweight Driven Clutch Spider // 2016-2019 Arctic Cat Snowmobile / Wildcat XX TEAM BOSS Clutch
SKU: 0648-841-M
$139.95
Our new Lightweight Driven Clutch Spider reduces rotating weight by .75lbs to improve throttle response. May effect clutching and operating RPM.
Alternator Pulley Delete Kit // 2018 Wildcat XX
SKU: TWCXX-APD
$34.95
Lose over 15lbs and reduce parasitic drag with our Alternator Pulley Delete Kit!
Turnkey Short Course Race Car // 2018 Wildcat XX
SKU: TWCXX-RACE
Price varies based on options.
We can build you a Turnkey Short Course Race Car out of your machine or we can supply the machine for you! Call us at 651-982-6020 or email tech@speedwerx.com to get your build started!
Oprions:
Stage 2 Exterminator Kit // 2018 Wildcat XX
SKU: TWCXX-EXT-2
$2519.79

Our Stage 2 Exterminator Kit gives you the biggest bang for your buck in an easy bolt-on package.

Riding Elevation:
Tire Size :
Muffler Option:
L2 End Cap Options:
Stage 1 Exterminator Kit // 2018 Wildcat XX
SKU: TWCXX-EXT-1
$1349.89

Our Stage 1 Exterminator Kit gives you a great bang for your buck in an easy bolt-on package.

Riding Elevation :
Tire Size:
Muffler Option:
L2 End Cap Options:
Q6 Series Stainless Steel Slip-On Exhaust // 2018 Wildcat XX
SKU: Q6-TWCXX-ATVP
$499.95
The Q6 Series Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and be maintenance free all while being only slightly louder than stock. Availability TBA.
L2 Series Stainless Steel Slip-On Exhaust // 2018 Wildcat XX
SKU: L2-TWCXX-ATVP
$429.95
This L2 (Light n' Loud) Series Stainless Steel Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and give your machine a new deeper, throatier
Endcap Options:
Stainless Steel Exhaust Header // 2018 Wildcat XX
SKU: TWCXX-HEADER
$769.95

Our Stainless Steel Exhaust Header has CNC machined flanges, stepped diameter equal length primary tubes, and a 3-into-1 merge collector to maximize overall power and performance.

Hypershift Clutch Kit // 2018 Wildcat XX with Stock Tires
SKU: CKTWCXX
$519.95

Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your UTV.

Riding Elevation:
Spec:
Hypershift Clutch Kit // 2018 Wildcat XX with 32"+ Tires
SKU: CKTWCXX-32
$519.95

Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your UTV.

Riding Elevation:
Spec:
Dynojet Power Commander V Fuel Controller // 2018 Wildcat XX
SKU: 36-002
$399.99
The Power Commander is a fuel injection adjustment unit that plugs inline with the machines stock ECU (electronic control unit).
High Flow Intake // 2018 Wildcat XX
SKU: TWCXX-HFI
$399.95
More Air = More Power!
Twin Air Air Filter // 2018 Wildcat XX
SKU: TWCXX-TA
$79.95
Coming soon. Twin Air filters are a laminated, dual-foam air filter that, when soaked in a special oil, allow free airflow in while keeping dirt, grime, sand and water out. They are effective, durable, washable and reusable.
Snorkel Kit // 2018 Wildcat XX
SKU: TWCXX-SK
$299.95
A must-have for deep mud and water riding!
Big Bore Kit // 2018 Wildcat XX
SKU: TWCXX-BBK
$99999.99
If you're not running boosted, there's no replacement for displacement!
Forged Piston Kit // 2018 Wildcat XX
SKU: TWCXX-FPK
$99999.99
Forged Piston Kits for Stock Bore and Big Bore Applications.
CNC Cylinder Head Porting- Stage 1 // 2018 Wildcat XX
SKU: TWCXX-HP1
$1499.95
Our Stage 1 Cylinder Head Upgrade includes CNC Porting and a Multi-Angle Valve Job.
CNC Cylinder Head Porting- Stage 2 // 2018 Wildcat XX
SKU: TWCXX-HP2
$1999.95
Our Stage 2 Cylinder Head Upgrade includes CNC Porting and Oversized Valves with a Multi-Angle Valve Job.
Camshaft Kit // 2018 Wildcat XX
SKU: TWCXX-CAM
$1029.95
The camshaft is key to getting maximum power and performance out of any four-stroke engine.
Valve Spring Kit // 2018 Wildcat XX
SKU: TWCXX-VSK
$449.95
The right valve springs are critical for preventing valve float during sustained high-rpm operation with high lift camshafts.
Clutch Housing Blower Fan Kit // 2018 Wildcat XX
SKU: TWCXX-CHB
$399.95
Our Clutch Housing Blower Fan Kits reduce belt temps for longer belt life.
Wildcat Willy's Heavy Duty Tie Rod Kit // 2018 Wildcat XX
SKU: TWCXX-HDTK
$429.95
Now Available! Tired of bending your Wildcat XX stock tie rods?? Wildcat Willy's tie rods are made out of the highest quality material on the market today.
Heavy Duty Steering Box Bushing // 2018-2019 Wildcat XX
SKU: TWCXX-SBB
$49.95
The factory steering rack is supported only on the right side, so this bushing is designed to go in the left side of the housing to keep it supported at both ends and possibly saving you from an expensive part failure!
Model Year:
Billet Gas Cap // Wildcat XX / X / Sport / Trail
SKU: TWCXX-BGC
$109.95 $79.95
Now Available!

Add a custom touch to your Wildcat with one of our Billet Gas Caps.

Billet Shifter Knob // Wildcat XX / X / Sport / Trail
SKU: TWCXX-SKX
$79.95 $59.95
Now Available!

Add a unique touch to your Wildcat with one of our Billet Shifter Knobs styled after Pistol Cartridges, Rifle Cartridges, and Shotgun Shells.

Style :
Whip Mount // 2018 Wildcat XX
SKU: TWCXX-WM
$29.95
Primary Clutch Bolt Socket // Arctic Cat Snowmobile and Wildcat, T60 Torx
SKU: 0644-281
$17.95
For 2007 and newer Arctic 8 tower and 6 tower and TEAM drive clutches with recessed torx head mounting bolt.
Clutch Weight Bushing // TEAM Clutch - 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: RWB-2
$15.95
These replacement weight bushings are for our TEAM clutch weights. Sold each.
Speedwerx H5 Alloy Secondary Clutch Springs // TEAM BOSS Secondary - 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: CCH5-L
$49.95
We have the rates you need...
Rate (Stripe Color):
Primary Clutch Puller // Arctic Cat Snowmobile and Wildcat, Metric Thread
SKU: 0744-080
$51.95
For 2007 and newer Arctic 8 tower and 6 tower and TEAM drive clutches with recessed torx head mounting bolt.

These items are intended for closed-course competition only. Alternation of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use.