Categories

Manufacturers

   

New Products

Display: Grid List
Show:
Sort By:
Stealth Exterminator Kit // 2017-2019 ZR 9000 / XF 9000
SKU: AC9000EXT-S
$743.90
Our Stealth Exterminator Kit gives you 18 more horsepower with the stock exhaust for a quiet performance boost.
Riding Elevation:
Vent Kit Color:
Billet Gas Cap // Stampede / Havoc
SKU: THAVOC-BGC
$109.95 $79.95
Now Available!

Add a custom touch to your Stampede or Havoc with one of our Billet Gas Caps.

Billet Shifter Knob // Stampede / Havoc
SKU: THAVOC-SKX
$79.95 $59.95
Now Available!

Add a unique touch to your Stampede, Havoc, or any other machine using a M8-1.00 thread with one of our Billet Shifter Knobs styled after Pistol Cartridges, Rifle Cartridges, and Shotgun Shells.

Style :
Axle Alignment Bar // 2018 Wildcat XX
SKU: TWCXX-AAB
$69.95
Axle alignment is a critical to prevent potential axle failures on the Wildcat XX. This bar acts as a simple go/no go gauge so you can easily check for the proper swing arm length and make adjustments if necessary.
L2 Competition Series Lightweight Muffler // Ceramic Coated // 2018-2019 ZR/XF/M 600/6000 ProCross/ProClimb
SKU: AC6000M-4
$379.95
Our L2 Series Muffler is 15.7 lbs. lighter than the stock suitcase on the ProCross/ProClimb 6000!
Lightweight Muffler // 2018-2019 ZR/XF/M 600/6000 ProCross/ProClimb
SKU: AC6000M-3
$319.95
Our Lightweight Muffler cuts over 11 pounds off the ProCross/ProClimb 6000 while maintaining a very trail-friendly sound level!
Finish:
FOX Shox Short Course Racing Valve and Spring Kit // 2018 Wildcat XX
SKU: TWCXX-FSK
$1695.00
Please call 651-982-6020 or email tech@speedwerx.com if you are interested in getting your suspension setup for short course racing!
Oil Cooler Kit // 2018 Wildcat XX
SKU: TWCXX-OCK
$699.95
Availability TBA
0823-529 OEM Textron Off Road Drive Belt - Wildcat XX
SKU: 0823-529
$133.95
We carry a full line of Textron Off Road OEM drive belts. We have them on hand and ready to ship to you!
TEAM BOSS Driven Clutch Teflon Roller // 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: 460329
$19.95
Venom Products High Performance Teflon® Rollers for the Arctic Cat B.O.S.S. clutch. This is an upgrade from the factory rollers. Sold individually- quantity of two required per machine!
TEAM BOSS Driven Clutch Delrin Washers // 2016+ Arctic Cat Snowmobile / Wildcat XX
SKU: 930651
$10.00
The secondary spring has to rotate in the spider as the clutch shifts. You can greatly reduce the scrubbing friction of the spring with the Delrin washer kit. Sold in a pack of 3.
Lightweight Driven Clutch Spider // 2016-2019 Arctic Cat Snowmobile / Wildcat XX TEAM BOSS Clutch
SKU: 0648-841-M
$139.95
Our new Lightweight Driven Clutch Spider reduces rotating weight by .75lbs to improve throttle response. May effect clutching and operating RPM.
Alternator Pulley Delete Kit // 2018 Wildcat XX
SKU: TWCXX-APD
$34.95
Lose over 15lbs and reduce parasitic drag with our Alternator Pulley Delete Kit!
Exhaust Valve Cable Gauge // All 6000-8000 C-TEC2 / 800 HO Models
SKU: AC800-EVG
$29.95
Improperly set valve cable adjustments can lead to engine bogging, hesitations, and inconsistent running. This gauge makes it easy to quickly check the cable spec!
Billet Gas Cap // Arctic Cat ZR 200 /120
SKU: ZR200BGC-X
$99.95
Add a little extra color and style to your ZR 200 or 120 with our Billet Gas Cap!
Color :
Turn Key Short Course Race Car Packages / 2018-2019 Wildcat XX
SKU: TWCXX-RACE
Price varies based on options.
We can build you a Race Ready Short Course Car out of your machine or we can supply a turn key machine for you! Call us at 651-982-6020 or email tech@speedwerx.com to get your build started!
Oprions:
Stage 2 Exterminator Kit // 2018 Wildcat XX
SKU: TWCXX-EXT-2
$2519.79

Our Stage 2 Exterminator Kit gives you the biggest bang for your buck in an easy bolt-on package.

Riding Elevation:
Tire Size :
Muffler Option:
L2 End Cap Options:
Stage 1 Exterminator Kit // 2018 Wildcat XX
SKU: TWCXX-EXT-1
$1349.89

Our Stage 1 Exterminator Kit gives you a great bang for your buck in an easy bolt-on package.

Riding Elevation :
Tire Size:
Muffler Option:
L2 End Cap Options:
Q6 Series Stainless Steel Slip-On Exhaust // 2018 Wildcat XX
SKU: Q6-TWCXX-ATVP
$499.95
The Q6 Series Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and be maintenance free all while being only slightly louder than stock. Availability TBA.
L2 Series Stainless Steel Slip-On Exhaust // 2018 Wildcat XX
SKU: L2-TWCXX-ATVP
$429.95
This L2 (Light n' Loud) Series Stainless Steel Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and give your machine a new deeper, throatier
Endcap Options:
Stainless Steel Exhaust Header // 2018 Wildcat XX
SKU: TWCXX-HEADER
$769.95

Our Stainless Steel Exhaust Header has CNC machined flanges, stepped diameter equal length primary tubes, and a 3-into-1 merge collector to maximize overall power and performance.

Hypershift Clutch Kit // 2018 Wildcat XX with Stock Tires
SKU: CKTWCXX
$519.95

Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your UTV.

Riding Elevation:
Spec:
Hypershift Clutch Kit // 2018 Wildcat XX with 32"+ Tires
SKU: CKTWCXX-32
$519.95

Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your UTV.

Riding Elevation:
Spec:
Dynojet Power Commander V Fuel Controller // 2018 Wildcat XX
SKU: 36-002
$399.99
The Power Commander is a fuel injection adjustment unit that plugs inline with the machines stock ECU (electronic control unit).
High Flow Intake // 2018 Wildcat XX
SKU: TWCXX-HFI
$399.95
More Air = More Power!
Twin Air Air Filter // 2018 Wildcat XX
SKU: TWCXX-TA
$79.95
Coming soon. Twin Air filters are a laminated, dual-foam air filter that, when soaked in a special oil, allow free airflow in while keeping dirt, grime, sand and water out. They are effective, durable, washable and reusable.
Snorkel Kit // 2018 Wildcat XX
SKU: TWCXX-SK
$299.95
A must-have for deep mud and water riding!
Big Bore Kit // 2018 Wildcat XX
SKU: TWCXX-BBK
$99999.99
If you're not running boosted, there's no replacement for displacement!
Forged Piston Kit // 2018 Wildcat XX
SKU: TWCXX-FPK
$99999.99
Forged Piston Kits for Stock Bore and Big Bore Applications.
CNC Cylinder Head Porting- Stage 1 // 2018 Wildcat XX
SKU: TWCXX-HP1
$1499.95
Our Stage 1 Cylinder Head Upgrade includes CNC Porting and a Multi-Angle Valve Job.
CNC Cylinder Head Porting- Stage 2 // 2018 Wildcat XX
SKU: TWCXX-HP2
$1999.95
Our Stage 2 Cylinder Head Upgrade includes CNC Porting and Oversized Valves with a Multi-Angle Valve Job.
Camshaft Kit // 2018 Wildcat XX
SKU: TWCXX-CAM
$1029.95
The camshaft is key to getting maximum power and performance out of any four-stroke engine.
Valve Spring Kit // 2018 Wildcat XX
SKU: TWCXX-VSK
$449.95
The right valve springs are critical for preventing valve float during sustained high-rpm operation with high lift camshafts.
Clutch Housing Blower Fan Kit // 2018 Wildcat XX
SKU: TWCXX-CHB
$399.95
Our Clutch Housing Blower Fan Kits reduce belt temps for longer belt life.
Razorback Technology 3.0 Edition Infrared Belt Temp Gauge
SKU: RBT10-15
$300.00
This Infrared Belt Temp Gauge provides instantaneous temperature readings so you can see a potential problem before the belt fails.
Wildcat Willy's Heavy Duty Tie Rod Kit // 2018 Wildcat XX
SKU: TWCXX-HDTK
$429.95
Now Available! Tired of bending your Wildcat XX stock tie rods?? Wildcat Willy's tie rods are made out of the highest quality material on the market today.
Heavy Duty Steering Box Bushing // 2018-2019 Wildcat XX
SKU: TWCXX-SBB
$49.95
The factory steering rack is supported only on the right side, so this bushing is designed to go in the left side of the housing to keep it supported at both ends and possibly saving you from an expensive part failure!
Model Year:
Billet Gas Cap // Wildcat XX / X / Sport / Trail / Prowler Pro / ATV / Select Snowmobile Models
SKU: TWCXX-BGC
$109.95 $79.95
Now Available!

Add a custom touch to your Wildcat XX, X, Sport or Trail, Prowler Pro, ATV, or select snowmobile models with one of our Billet Gas Caps.

Billet Shifter Knob // Wildcat XX / X / Sport / Trail / Prowler Pro / Prowler HDX
SKU: TWCXX-SKX
$79.95 $59.95
Now Available!

Add a unique touch to your Wildcat, Prowler Pro, Prowler HDX, or any other machine using a 3/8-16 thread with one of our Billet Shifter Knobs styled after Pistol Cartridges, Rifle Cartridges, and Shotgun Shells.

Style :
Whip Mount // 2018 Wildcat XX
SKU: TWCXX-WM
$29.95
Lightweight Snowflap // 2012-2019 ProCross/ProClimb/Ascender models exc. 2012 F/XF
SKU: ACM8SF-KIT
$79.95
Our new Lightweight Snowflap lets you shed 1.15 lbs from your machine, and allows better access to the rear bumper. Available Mid-November.
Billet Tensioner Block Kit // 2018 ZR 6000 R XC
SKU: ZR600XCTB-KIT
$57.95
A must have for cross-country racing!
Hypershift Clutch Kit // 2018-2019 M 8000 / XF 8000 High Country - Stage 2 Kit
SKU: CKA800-19
$399.95
Developed and tested by the same team of people that Factory Team Arctic Cat trusts and uses! If you're looking for the best clutch kit for your sled, look no further...
Riding Elevation:
Clutch Alignment Bar Plug // Arctic Cat 1.530" Offset - 2017-2018 Models with Idler Bearing Clutch
SKU: 0744-100
$17.95
Must be used with Alignment Bar 0744-093 to check for proper alignment on 2017-2018 models with idler bearing clutch.
Junior Suspension Spring & Running Board Support Kit // Arctic Cat ZR 200 & Yamaha SnoScoot
SKU: AC200SK-JR
$219.99
A complete package for youth riders, or aggressive kids and racing applications where a heavier spring is not needed in the rear.
Hypershift Clutch Kit // 2018-2019 ZR 8000 / XF 8000 // 1"-1.25" Track - Stage 2 Kit
SKU: CKA800-15-2
$399.95
Developed and tested by the same team of people that Factory Team Arctic Cat trusts and uses! If you're looking for the best clutch kit for your sled, look no further...
Riding Elevation:
Lightweight Kit // 2018-2019 Arctic Cat M 8000 Models
SKU: SPX-LWK-XX
Price varies based on options.
Our new Lightweight Kit lets you shed 8 lbs from your machine, over 2.5 lbs of which is rotating weight!
Complete Kit:
Ski Runners: CCR-100-1 - Woody's Chrome Moly Ski Runners w/ Alum Nuts (Add $222.46)
Snow Flap : ACM8SF-KIT - Lightweight Snow Flap (Add $79.95)
Spar Inserts: 1607-747M x 6 - Modified Chassis Spar Nut Inserts (Add $37.32)
Control Kit: SPXLWCK-18 - Lightweight Handlebar Control Kit (Add $269.95)
Driven Spider: 0648-841M - Modified Driven Clutch Spider / Hub (Add $139.95)
Recoil Cup: SPXLWRC - Aluminum Recoil Cup (Add $99.95)
Helix: TBH-XX - Speedwerx Lightweight Helix (please specify angle) (Add $149.95)
Running Board Support Kit // Arctic Cat ZR 200 & Yamaha SnoScoot
SKU: ZR200RBSK
$59.95
This kit is designed to stiffen and strengthen the stock running boards to prevent them from flexing and bending. Legal for all ISR racing classes!
Lightweight TSS-04 Helixes
SKU: TSS04-XXX
$199.95
Our Lightweight TEAM TSS-04 Helixes are machined in-house- we shave off excess material to save .3lbs over the stock type helixes without compromising strength or durability.
Please specify desired angles (ex. 59-43.36 / 56-40.46):
L2 Competition Series Adjustable Lightweight Muffler // Ceramic Coated // 2018-2019 ZR 6000 R SX
SKU: AC600M-11-ADJ
$849.95
New fitment for the 2018 SX! ISR Legal for Pro & Pro Lite class Snocross Racing!
L2 Competition Series Lightweight Muffler // Ceramic Coated // 2018-2019 ZR 6000 R SX
SKU: AC600M-11
$379.95
New fitment for the 2018 SX! ISR Legal for Pro & Pro Lite class Snocross Racing!
Venom Products (Team) Borg Warner Hyvo Top Sprocket - 13 Wide - 33T External Spline // ProCross/ProClimb 4-Stroke
SKU: 422315-XXX
$235.95
Made of heat treated, case-hardened 8620 high-alloy steel, Venom Products CNC-machined sprockets are made in an ISO 9000 certified facility right here in the USA. Does not fit 2017+ 9000!
Size:
Venom Products (Team) Borg Warner Hyvo Top Sprocket - 13 Wide - 19T Internal Spline // 2016+ ProCross/ProClimb 2-Stroke
SKU: 931075-XXX
$49.95
Made of heat treated, case-hardened 8620 high-alloy steel, Venom Products CNC-machined sprockets are made in an ISO 9000 certified facility right here in the USA.
Size:
Venom Products (Team) Borg Warner Hyvo Bottom Sprocket - 13 Wide - 34T Internal Spline // 2016+ ProCross/ProClimb
SKU: 931076-XXX
$109.95
Made of heat treated, case-hardened 8620 high-alloy steel, Venom Products CNC-machined sprockets are made in an ISO 9000 certified facility right here in the USA.
Size:
Venom Products (Team) Borg Warner Hyvo Chain - 13 Wide // 2016+ ProCross/ProClimb
SKU: 93063X
$99.95
Venom Products Borg Warner Hyvo Chains fit all 13 wide Borg Warner gears. Made in the USA from high strength steel.
Length:
Drive Belt Removal / Deflection Adjustment Tool // TEAM BOSS & Tied Secondary
SKU: 0744-098
$8.95
A must have for your tool box...
FROGZSkins Intake Vent Cover- Wildcat Trail / Sport
SKU: F0266
$19.95
Filter out everything but air...
0627-106 OEM Arctic Cat Drive Belt
SKU: 0627-106
$53.95
We carry a full line of Arctic Cat stock drive belts. We have them on hand and ready to ship to you!
Exhaust Removal Bit // 2017+ Arctic Cat 9000 Models - T50 Torx Ball End
SKU: 0644-623
$14.95
Use to remove the Torx screws on the 998 engine exhaust at the turbo.
Primary Clutch Bolt Socket // Arctic Cat Snowmobile and Wildcat, T60 Torx
SKU: 0644-281
$17.95
For 2007 and newer Arctic 8 tower and 6 tower and TEAM drive clutches with recessed torx head mounting bolt.
Top Sprockets - Borg Warner Hyvo - 13 Wide - 19T Internal Spline - 2018+ M/XF HC 8000 / ZR 6000 R SX/XC
SKU: 3602-XXX
Price varies based on options.
Genuine Arctic Cat OEM Borg Warner Hyvo Top Sprockets Fits only 2018 M8000 / XF 8000 HC or 2018 ZR 6000 R SX & XC with hollow jackshaft!
Available Sizes:
Top Sprockets - Borg Warner Hyvo - 15 Wide - 33T External Spline - 2017-2019 9000
SKU: 1702-XXX
Price varies based on options.
Genuine Arctic Cat OEM Borg Warner Hyvo Top Sprockets Fits 2017-2019 9000 models, or 2016 9000 upgraded to 15w chain.
Available Sizes:
Tether Switch // Arctic Cat ZR 200
SKU: 7639-732
$61.95
A must-have for racing!

These items are intended for closed-course competition only. Alternation of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use.